View AZ2800_4453331.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ2800
30 AMP MINIATURE POWER RELAY
FEATURES * * * * * * 30 Amp switching capability DPST-NO and DPDT configuration Meets 8 mm creepage, 4 kV dielectric Meets Class F construction Epoxy sealed versions available UL, CUR file E44211, VDE 40023442
CONTACTS GENERAL DATA
Arrangement Ratings DPST-N.O. DPDT Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current:30 A N.O, 3 A N.C. Max. switched voltage: 600 VAC or 30 VDC* UL, CUR N.O. 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA/25.3 FLA at 240 VAC (DC coils only), 30k cycles Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 5 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 ms typical 25 ms maximum with bounce 10 ms typical 25 ms maximum with bounce (with no coil suppression)
UL, CUR 3 A at 277 VAC General Use, 100k cycles N.C. VDE N.O. 20A 250VAC, N.C. 3A 250VAC
*Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory.
Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 109 ohms minimum at 500 VDC DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage DC: -40C (-40F) to 95C (203F) AC: -40C (-40F) to 75C (167F) -40C (-40F) to 155C (311F) 0.062" DA at 10-55 Hz Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Quick connect tabs
Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force.
Material Resistance
Silver cadmium oxide, silver tin oxide <50 milliohms initially (6 V, 1 A voltage drop method)
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature DC: 0.925 W AC: 2.6 VA DC: 5.0 W at 20C (68F) AC: 7.0 VA at 20C (68F) DC: 48C (86F) at nominal coil voltage AC: 68 C (122F) at nominal coil voltage Max. 155C (311F) Max. Solvent Temp. Max. Immersion Time Weight Enclosure Terminals
80C (176F) 30 seconds 86 grams
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.
3/3/08W
AZ2800
RELAY ORDERING DATA
COIL SPECIFICATIONS - DC Coil
Nominal Coil VDC 6 12 24 48 110 Must Operate VDC 4.5 9.0 18.0 36.0 82.5 Max. Continuous VDC 10.5 20.7 41.8 83.4 190.5 Coil Resistance 10% 22 86 350 1390 7255
ORDER NUMBER*
AZ2800-2C-6D AZ2800-2C-12D AZ2800-2C-24D AZ2800-2C-48D AZ2800-2C-110D
COIL SPECIFICATIONS - AC Coil
Nominal Coil VAC 12 24 120 208 220 240 277 Must Operate VAC 9.6 19.2 96.0 166.4 176.0 192.0 221.6
60 Hz [1]
Max. Continuous VAC 15.6 31.2 156.0 270.4 286 312.0 360.1 Nominal Current mA 10% 325 154 33.5 19.3 18.1 17.3 14.5 Coil Resistance 10% 9.5 35.7 830 2600 2870 3800 4700
ORDER NUMBER*
AZ2800-2C-12A AZ2800-2C-24A AZ2800-2C-120A AZ2800-2C-208A AZ2800-2C-220A AZ2800-2C-240A AZ2800-2C-277A
*Add suffix "E" for epoxy sealed version. Add suffix "K" for 0.187x.020 or "J" for 0.187x.032 QC coil terminals. Substitute '2A" for "2C" to indicate DPST (N.O.) contacts. Add suffix "E" to "2A" or "2C" to indicate AgSNO2 contacts. [1] For 50 Hz coil replace "A" with "A5" (example: "A2280-2C-24A5").
MECHANICAL DATA
.58 [14.8]
.31 [8.0]
WIRING DIAGRAM
.63 [16.0]
.18 [4.6] 1.00 [25.4] 6 x.250 [6.35] 1.62 [41.1] 2.35 [59.7] 1.04 [26.4]
1.36 [34.5]
2 4 3
0
.15 [3.8]
6
8
7 1
2 FORM C
8 x.032 [.81]
2 x DIM "A"
DIM. "A" = .250 [6.35] x .032 [.81] THK - STANDARD
8 x.45 [11.4]
0 2 4
DIM. "A" = .187 [4.75] x .020 [.51] THK - "K" SUFFIX
6
8 1
.13 [3.3]
2 FORM A
2.69 [68.4]
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
3/3/08W

▲Up To Search▲

Price & Availability of AZ2800

	To Download AZ2800 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .